A typical project will take from five to eight days of hands on work at the project site. The entire process includes communication and scheduling, along with design and material selection, samples and approvals, ect. We need at least three weeks of planning and designing before your scheduled work on site.
Our Artists use contractor grade materials, which means that we make it out of the same stuff your house is made of. Our carefully tested and selected materials are formulated for high traffic commercial attractions and industrial application. We are always exploring what the industry is doing new and testing out all the best materials available.
In both residential and commercial settings, I recommend a mild streak free detergent like Dawn© dish soap to clean.
I would advise a yearly standard of buffing with wax in commercial locations- depending on traffic- to keep the floor non slip and approx. 5 years for residential maintenance. This will ensure your design will keep it’s luster for years to come
Yes. We may use a different process and material for vertical surfaces, rest assured that your project will be performed with the same detail and care as our flooring projects. If you are interested, please inquire about our Mural services.
Every project is a bit different. We will be in close contact for the design process, and it will be clearly communicated what is required of you for your specific project. Typically, we ask that our clients make arrangements to not have any traffic (foot or otherwise) on the project site, ensure that there is utilities available and make parking arrangements for our artists.
Thank you for providing feedback so we can brag, show our friends, and make improvements. Follow this link for your review submission.
The application we will be performing will actually feel better on your feet than a tile. Ceramic is unnaturally cold and flat…really bad for your feet. Our materials and installations overwhelmingly receive positive reviews over tile in every way.
The likelihood is minimal that you will damage this floor, however, we do like to be realistically prepared for any event. You will be provided with a touch up kit upon request. The flooring is surprisingly easy to repair and you will have direct access to your Installation Artists in case anything ever does go wrong.
Although these materials are formulated to withstand a high volume of traffic, we recommend that you maintain a standard buffing of wax to ensure the luster of your flooring will last for years to come.
While most of our clients have something in mind, you do not have to have an idea in order to call us. Let us brainstorm ideas with you! Our Artists are trained and experienced in choosing just the right colors and feel of your project so that it feels right at home where it is. Our overwhelming response is “It’s exactly what I wanted!”
Your Artist will be designing the project with you. You are free to interact as much or as little as you like. While we will most definitely give you what you desire, our artists do appreciate a bit of freedom. If you are already working with a designer, architect or contractor, we are happy to communicate with them regarding the project but prefer direct access to the clientele.
This is a lifetime installation. Our materials are at the top of the market for building supplies, recommended to be used in commercial, industrial, and commercial attraction application. Please see your care sheet to ensure long term beauty.
Yes, however we do NOT recommend a shiny or high gloss finish for exterior application. Our materials are all UV stable, which means the colors won’t easily fade in the sunlight. The materials are industry-wide, made to be used in exterior applications with high preforming results.
Yes. This is considered a ‘seamless’ flooring application which complies with most states’ non-slip, low VOC regulations. It is easy to clean because it is a non porous, and you also don’t have to worry about water getting under your floor in case of leaks. The materials have a strong resistance to chemicals and because there is no grout, you don’t have to worry about odor. Simply wash with soap and water, rinse, and squeegee.
Short answer: No. Ours are better.
Our designs don’t just LOOK 3D…they really ARE 3D, meaning you can feel the texture of the work. Our process is hand crafted on site, so there is no cut and paste imaging going on here. Truly, you will be impressed.
The viral photographs you see circulating the net are essentially printed vinyl photographs with the perspective skewed to appear to be 3D. The stickers are then covered in a clear epoxy. These floors really only look like that from the exact point that the photograph was taken. From anywhere else in the room it would look long and stretched out like a smear.
Example: the STOP letters printed on the roads are long and skinny, so they can be viewed from across (from your perspective in your car). Check out this picture:
(I crossed out the name of the company here because I don’t want them to look bad…it’s just a good example of what I’m talking about)
Yep. That’s a beach. Please, just…don’t.
Our designs are legible and stunning from every angle, everywhere in the room.
I always wonder how long those vinyl stickers keep their color…and if their epoxy yellows in reaction to being placed over an inferior product.
(I crossed out the name of the company here because I don’t want them to look bad…it’s just a good example of what I’m talking about)
Yep. That’s a beach. Please, just…don’t.
Our designs are legible and stunning from every angle, everywhere in the room.
I always wonder how long those vinyl stickers keep their color…and if their epoxy yellows in reaction to being placed over an inferior product. 
